When you are on a drive to a destination that is not your regular known route, you need to get a navigation guide which you can completely rely upon. Today the latest cars are coming with in-built navigation systems. But if your car isn’t having one, you have options to install it and enjoy driving longer routes to various destinations without the risk of losing your way. Here we have collected some useful tips from the Hyundai dealer serving Toms River on how you can install a Navigation system in your car, especially if you own a vehicle from a brand like Hyundai.
The pre-requisites of Installing a Navigation system
To install the latest navigation system in your Hyundai car, you would need to have a few pre-requisites. Here is the list of the components as well as the conditions that are necessary for it.
- GPS Antenna
If you already have a GPS antenna installed in the vehicle, then you are already on the way to install it. If you don’t, get one installed first, either on the meter, or on the cloth rack or most preferably outside the vehicle, like on the roof or on the boot of the vehicle.
- The Placement of GPS Antenna
The GPS antenna needs to be installed at an area where there should be no metal frame or structure overlapping it. If you want it to be installed near the windscreen of your vehicle, make sure the windshield has no anti-explosion or insulation tinting film applied on it, as in that case the intensity of the satellite signal might get negatively affected. If that is not a choice for you, the best way out is placing the GPS antenna outside the vehicle.
- Compatibility
A navigation unit can be compatible only with the vehicles that come with a 12-volt battery and have negative grounding feature.
- Working with Electricals and Wiring
As you need to work with the electrical system of the vehicle during the installation process, you need to avoid the chances of a short circuit in every possible way.
- For this you must disconnect all the negative terminals from the battery before you start the process of installation.
- To secure the entire wiring system, use cable clamps or safety electrical tapes. Never leave any wiring to remain bare or exposed.
- Check for all the cables and wires are routed and secured, especially those of the GPS antenna, to avoid any chance of getting trapped by any moving part of the vehicle.
- Take special notice of the wiring connected to the control mechanisms of the vehicle like the steering wheel, parking brake, shift lever, sliding seat tracks, doors and so on.
- Precautionary Measures
As per the guidelines of the Hyundai dealership serving Toms River one should strictly avoid routing the cables to areas that reach high temperatures to prevent the cables from getting damaged as that can cause a short circuit or malfunctioning of the unit if the insulation heats up, and all this can result in permanent damages to the vehicle.
Summing Up
Following the above said tips would ensure a safe and sound installation process of the navigation system in your Hyundai car and you can reach any destination through the best route in time.